Description
Hinnagård's AX Boomerang is a hydraulic rotor cutter with blades or 10 mm chain. It is adapted for mounting on Stora BM loader or on the front of a tractor. The protective plate is spring-loaded to easily roll around obstacles such as posts, trees, guardrails, etc. AX Boomerang is also articulated so you can cut at approximately 30 degree angle - perfect for cutting in ditches. The Boomerang also tilts 90 degrees upward for cutting branches etc. It is standard equipped with telescopic extension of 100 cm. (Total max 2.90 m to 3.90 m from center of implement carrier.) For operation of the cutting unit, a single-acting hydraulic outlet and return are required, as well as a leak line directly to the machine's hydraulic tank. Additionally two double-acting hydraulic outlets for telescopic extension and tilting. An excellent product for first pass or around posts that often complements a rear-mounted crane with clearer, for example.
Features
- Hydraulic rotor cutter with blades or 10 mm chain
- Adapted for mounting on loader or tractor front
- Spring-loaded protective plate - rolls easily around obstacles
- Articulated approx. 30 degree angle - perfect for ditch cutting
- Also tilts 90 degrees upward for cutting branches
- Telescopic extension 100 cm (total max 2.90-3.90 m)
- Perfect for first pass or around posts
- Complements a rear-mounted crane with clearer perfectly