Description
T125 – T125B Guardrail cutter handles most guardrails and posts with very good results. The machine has double rotors and a cutting width of more than 125 cm, depending on how much overlap you want. Max 150 cm height on posts and guardrails. Max width on granite guardrails 100 cm. Weight is 480 kg. T125 Guardrail cutter is hydraulically driven with two Sunfab 25 cc motors. Normally 100 l/m is used. Working pressure max continuously 350 bar. Rotor speed is 3,800 rpm. Under the protective plates are rotors with 2 chains 10 mm in each rotor. Right rotor is hydraulically openable so that the cutter can be lowered over the guardrail or removed at obstacles. Spring tension adjustment is done from the control box in the cab. Post cutter needs one pressure and two returns from your machine. Electric box is placed inside the cab and connected to 12 or 24 volts, electric box controls right rotor. If crane is equipped with extra double-acting outlet, electric box is not needed.
Features
- Double rotor cutter for posts and guardrails
- Cutting width over 125 cm (depending on overlap)
- Max height on posts and guardrails 150 cm
- Max width on granite guardrails 100 cm
- Hydraulically driven with two Sunfab 25 cc motors
- Normally 100 l/min oil quantity is used
- Working pressure max continuously 350 bar
- Rotor speed 3,800 rpm
- Right rotor hydraulically openable
- Spring tension adjustment from control box in cab
- High quality product for fast, efficient cutting
Technical Specifications
Accessories
- Width extension 50 cm
- Rotating house